75W PFC Power Supply SP-75

75W PFC Power Supply SP-75

Features:

  • Universal AC input / Full range
  • Built-in active PFC function, PF>0.93
  • Protections:Short circuit/Over load/Over voltage
  • Built-in constant current limiting circuit
  • Low profile: 33mm thickness
  • LED indicator for power on
  • 100% full load burn-in test
  • Fixed switching frequency at PFC:67KHz PWM:134KHz

Description

75W PFC Power Supply SP-75 Technical Data

MODELSP-75-3.3SP-75-5SP-75-7.5SP-75-12SP-75-13.5SP-75-15SP-75-24SP-75-27SP-75-48
OUTPUTDC VOLTAGE3.3V5V7.5V12V13.5V15V24V27V48V
RATED CURRENT15A15A10A6.3A5.6A5A3.2A2.8A1.6A
CURRENT RANGE0 ~ 15A0 ~ 15A0 ~ 10A0 ~ 6.3A0 ~ 5.6A0 ~ 5A0 ~3.2A0 ~ 2.8A0 ~ 1.6A
RATED POWER49.5W75W75W75.6W75.6W75W76.8W75.6W76.8W
RIPPLE & NOISE (max.) Note.280mVp-p80mVp-p80mVp-p80mVp-p80mVp-p80mVp-p100mVp-p100mVp-p100mVp-p
VOLTAGE ADJ. RANGE3.14 ~ 3.63V4.75 ~ 5.5V7.13 ~ 8.25V11.4 ~ 13.2V12.8 ~ 14.9V14.3 ~ 16.5V22.8 ~ 26.4V25.7 ~ 29.7V45.6 ~ 52.8V
VOLTAGE TOLERANCE Note.3±2.0%±2.0%±2.0%±2.0%±2.0%±2.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±1.0%±1.0%±1.0%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
SETUP, RISE, HOLD TIME600ms, 60ms, 36ms at full load
INPUTVOLTAGE RANGE Note.585 ~ 264VAC        120 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
POWER FACTOR (Typ.)PF>0.93/230VAC      0.96/115VAC at full load
EFFICIENCY (Typ.)68%72%74%77%78%79%80%80%80%
AC CURRENT(Typ.)1.3A/115VAC          0.7A/230VAC
INRUSH CURRENT (Typ.)COLD START 30A/230VAC
LEAKAGE CURRENT<2mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power
Protection type: Constant current limiting, recovers auto matically after fault condition is removed
OVER VOLTAGE3.8 ~ 4.46V5.75 ~ 6.75V8.63 ~ 10.13V13.8 ~ 16.2V15.53 ~ 18.23V17.25 ~ 20.25V27.6 ~ 32.4V31.05 ~ 36.45V55.2 ~ 64.8V
Protection type: Shut down o/p voltage, re-power on to recover
FUNCTIONREMOTE CONTROL (OPTION)CN3:4 ~10VDC POWER OFF,<0 ~ 0.8VDC POWER ON
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.05%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC(Note4)SAFETY STANDARDSDesign refer to UL60950-1,TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P: 3KVAC   I/P-FG: 1.5KVAC    O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022(CISPR22) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11;EN50204,EN55024,Light industry level, criteria A
OTHERSMTBF208.8K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION179*97*33mm (L*W*H)
PACKING0.578Kg; 30pcs/19.24Kg/0.0250CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. derating may be needed under low input voltages.Plase check the derating curve for more details.

75W PFC Power Supply SP-75 Mechanical

75W PFC Power Supply SP-75 Certificate

LVD Certificate
75W PFC Power Supply SP-75 LVD Certificate
EMC Certificate
75W PFC Power Supply SP-75 EMC Certificate
RoHS Certificate
PFC Power Supply RoHS

Send message