Triple Output 65W Open Frame Power Supply PT-65

Triple Output 65W Open Frame Power Supply PT-65

Features:

  • Universal AC input/Full range
  • Low leakage current<0.5mA
  • Protections: Short circuit/Over load/Over voltage
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 65KHz

Description

Triple Output 65W Open Frame Power Supply PT-65 Technical Data

MODELPT-65APT-65BPT-65CPT-65D
OUTPUTOUTPUT NUMBERCH1CH2CH3CH1CH2CH3CH1CH2CH3CH1CH2CH3
DC VOLTAGE5V12V-5V5V12V-12V5V15V-15V5V15V24V
RATED CURRENT5.5A2.5A0.5A5.5A2.5A0.5A5.5A2A0.5A4A2A1A
CURRENT RANGE0.4 ~ 7A0.2 ~ 3.2A0 ~ 0.7A0.4 ~ 7A0.2 ~ 3.2A0 ~ 0.7A0.4 ~ 7A0.2 ~ 2.6A0 ~ 0.7A0.5 ~ 5A0.2 ~ 4A0.2 ~ 1.3A
RATED POWER60W63.5W65W68W
OUTPUT POWER (max.)Rated output power for convection; 72W with 18 CFM min.Forced air
RIPPLE & NOISE (max.) Note.250mVp-p120mVp-p50mVp-p50mVp-p120mVp-p100mVp-p50mVp-p120mVp-p100mVp-p50mVp-p100mVp-p200mVp-p
VOLTAGE ADJ. RANGECH1: 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3±4.0%±7.0%±5.0%±4.0%±7.0%±5.0%±4.0%±7.0%±5.0%±4.0%±6.0%±6.0%
LINE REGULATION±1.0%±2.0%±1.0%±1.0%±2.0%±1.0%±1.0%±2.0%±1.0%±1.0%±2.0%±3.0%
LOAD REGULATION±3.0%±4.0%±1.0%±3.0%±4.0%±1.0%±3.0%±4.0%±1.0%±2.0%±5.0%±5.0%
SETUP, RISE, HOLD TIME800ms, 20ms,60ms at full load
INPUTVOLTAGE RANGE90 ~ 264VAC          127 ~ 370VDC
FREQUENCY RANGE47 ~ 440Hz
EFFICIENCY (Typ.)76%77%77%77%
AC CURRENT1.5A/115VAC      0.9A/230VAC
INRUSH CURRENT (max.)COLD START 20A/115VAC     40A/230VAC
LEAKAGE CURRENT<0.5mA
PROTECTIONOVERLOAD73 ~ 95W rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGECH1: 5.75 ~ 6.75VDC
Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.04%/ºC (0 ~ 50ºC) on +5V output
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note4)SAFETY STANDARDSDesign refer to UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P: 3KVAC  I/P-FG: 1.5KVAC  O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; Light industry level, criteria A
OTHERSMTBF288.1Khrs min. MIL-HDBK-217F(25ºC)
DIMENSION127*76*42mm (L*W*H)
PACKING0.25Kg; 54pcs/15.9Kg/1.35CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºCof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5.Mounting holes M1 and M2 should be grounded for EMI purposes.

Triple Output 65W Open Frame Power Supply PT-65 Mechanical

Triple Output 65W Open Frame Power Supply PT-65 Certificate

LVD Certificate
65W Open Frame Power Supply PT-65 LVD Certificate
EMC Certificate
RoHS Certificate
Open Frame Power Supply RoHS

Send message