600W Switching Power Supply SE-600

600W Switching Power Supply SE-600

Features:

  • High power density 4.9w/in3
  • AC input active surge current limiting
  • AC input range selected by switch
  • Protections:Short circuit/Over load/Over voltage/Over temperature
  • Forced air cooling by built-in DC fan
  • Built-in remote sense function
  • Low cost

Description

600W Switching Power Supply SE-600 Technical Data

MODELSE-600-5SE-600-12SE-600-15SE-600-24SE-600-27SE-600-36SE-600-48
OUTPUTDC VOLTAGE5V12V15V24V27V36V48V
RATED CURRENT100A50A40A25A22.2A16.6A12.5A
CURRENT RANGE0 ~ 100A0 ~ 50A0 ~ 40A0 ~ 25A0 ~ 22.2A0 ~ 16.6A0 ~ 12.5A
RATED POWER500W600W600W600W599.4W597.6W600W
RIPPLE & NOISE (max.) Note.2150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p200mVp-p200mVp-p
VOLTAGE ADJ. RANGE4.75 ~ 5.5V10 ~ 13.5V13.5 ~ 16.5V22 ~ 26.4V24 ~ 30V32 ~ 40V43 ~ 56V
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±2.0%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
SETUP, RISE, HOLD TIME1000ms, 50ms, 20ms/230VAC  1000ms, 50ms, 16ms/115VAC at full load
INPUTVOLTAGE RANGE90 ~ 130VAC / 180~260VAC selected by switch     254~370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)78%83%84%87%87%87%88%
AC CURRENT12A / 115VAC     7.5A / 230VAC
INRUSH CURRENT (max.)30A / 230VAC     60A / 230VAC
LEAKAGE CURRENT<2.0mA / 240VAC
PROTECTIONOVERLOAD105~125% rated output power
Protection type: Shut down o/p voltage, re-power on to recover
OVER VOLTAGE5.75 ~ 6.3V13.8 ~ 16.2V18 ~ 21V27.6 ~ 32.4V31 ~ 36.5V42 ~ 50V57.6 ~ 67.2V
Protection type: Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE85ºC± 5ºC (TSW1) Detect on heatsink of power transistor
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENTWORKING TEMP.,HUMIDITY-20 ~ +60ºC, 20 ~ 90% RH
STORAGE TEMP., HUMIDITY-40 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.05%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMCSAFETY STANDARDSDesign refer to UL60950-1
WITHSTAND VOLTAGEI/P-O/P: 3KVAC  I/P-FG: 1.5KVAC  O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
OTHERSMTBF197khrs min. MIL-HDBK-217F (25ºC)
DIMENSION247*127*63.5mm (L*W*H)
PACKING2.1Kg; 6pcs/13.4Kg/0.98CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.

600W Switching Power Supply SE-600 Mechanical

600W Switching Power Supply SE-600 Certificate

LVD Certificate
600W Switching Power Supply SE-600 LVD Certificate
EMC Certificate
600W Switching Power Supply SE-600 EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS

Send message