600W Switching Power Supply SCN-600

600W Switching Power Supply SCN-600

Features:

  • AC input range selected by switch
  • Protections: Short circuit/ Over voltage/Over load/ Over temp.
  • High reliability/ Low ripple noise
  • Built-in remote sense function
  • Built-in remote ON-OFF control
  • With parallel function
  • Can adjust from 20~100% output voltage by external control 1-5V
  • Forced air cooling by built-in DC fan
  • Case coating with paint

Description

600W Switching Power Supply SCN-600 Technical Data

MODELSCN-600-12SCN-600-15SCN-600-18SCN-600-24SCN-600-48
OUTPUTDC VOLTAGE12V15V18V24V48V
RATED CURRENT50A40A33A25A12A
CURRENT RANGE0 ~ 50A0 ~ 40A0 ~ 33A0 ~ 25A0 ~ 12A
RATED POWER600W600W600W600W600W
RIPPLE & NOISE (max.) Note.2120mVp-p150mVp-p180mVp-p240mVp-p480mVp-p
VOLTAGE TOLERANCE Note.3±1.0%±1.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%
SETUP, RISE, HOLD TIME800ms, 50ms, 16ms at full load
INPUTVOLTAGE RANGE90 ~ 130VAC / 180~260VAC selected by switch     260~370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)80%81%82%85%87%
AC CURRENT11A / 115VAC     7.0A / 230VAC
INRUSH CURRENT (max.)60A / 230VAC
LEAKAGE CURRENT3.5mA / 240VAC
PROTECTIONOVERLOAD110~135% rated output power
Protection type: Current limiting, delay Shut down o/p voltage, re-power on to recover.
OVER VOLTAGE110~135% follow to output set up point
Protection type: Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE>100ºC / measure by heat sink, near transformer
Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENTWORKING TEMP.,HUMIDITY-10 ~ +65ºC, 20 ~ 90% RH
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.04%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMCSAFETY STANDARDSDesign refer to UL1950, CSA22.2, IEC60950
EMI CONDUCTION & RADIATIONCompliance to FCC part 15 class A
WITHSTAND VOLTAGEI/P-O/P: 1.5KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
OTHERSMTBF120khrs min. MIL-HDBK-217F (25ºC)
DIMENSION291*132*68mm (L*W*H)
PACKING2.3kg; 8pcs/ 24kg/ CARTON
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

600W Switching Power Supply SCN-600 Mechanical

600W Switching Power Supply SCN-600 Mechanical

600W Switching Power Supply SCN-600 Certificate

LVD Certificate
600W Switching Power Supply SCN-600 LVD Certificate
EMC Certificate
600W Switching Power Supply SCN-600 EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS

Send message