55W Battery Charger Power Supply AD-55

55W Battery Charger Power Supply AD-55 With UPS function

Features:

  • Universal AC input / Full range
  • Protections:Short circuit/Over load/Over voltage
  • Battery low protections
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 45KHz

Description

55W Battery Charger Power Supply AD-55 With UPS function Technical Data

MODELAD-55AAD-55B
OUTPUTOUTPUT NUMBERCH1CH2CH1CH2
DC VOLTAGE13.8V13.4V27.6V26.5V
RATED CURRENT3.5A0.23A1.8A0.16A
CURRENT RANGE0 ~ 4A———-0 ~ 2A———-
RATED POWER51.38W53.92W
RIPPLE & NOISE (max.) Note.2100mVp-p———-100mVp-p———-
VOLTAGE ADJ. RANGECH1: 12 ~ 14.5VCH1: 24 ~ 29V
VOLTAGE TOLERANCE Note.3±1.0%———-±1.0%———-
LINE REGULATION±0.5%———-±0.5%———-
LOAD REGULATION±0.5%———-±0.5%———-
SETUP, RISE, HOLD TIME800ms, 50ms, 80ms/230VAC    1600ms, 50ms, 16ms/115VAC at full load
INPUTVOLTAGE RANGE88 ~ 264VAC          124 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)71%74%
AC CURRENT1.6A/115VAC        1A/230VAC
INRUSH CURRENT (max.)COLD START 20A/115VAC         40A/230VAC
LEAKAGE CURRENT<1mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power.
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGECH1: 14.49 ~ 18.63VCH1: 28.98 ~ 37.26V
Protection type: Hiccup mode, recovers automatically after fault condition is removed
FUNCTIONDC ALARM SIGNAL(OPTIONAL)AC fail CN1 PIN2
Battery low under charge voltage 82.5% 2% CN1 PIN1
Normal 0.8V max. Abnormal 5V±0.5V
ENVIRONMENTWORKING TEMP.-10 ~ +60℃
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/℃ (0 ~ 50℃) on CH1 output
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMCSAFETY STANDARDSDesign refer to UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P:3KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level,  criteria A
OTHERSMTBF304.3K hrs min. MIL-HDBK-217F (25℃ )
DIMENSION159*97*38mm (L*W*H)
PACKING0.492Kg; 30pcs/16.37Kg/0.0250CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

55W Battery Charger Power Supply AD-55 Mechanical

55W Battery Charger Power Supply AD-55

55W Battery Charger Power Supply AD-55 Certificate

LVD Certificate
55W Battery Charger Power Supply AD-55 LVD Certificate
EMC Certificate
55W Battery Charger Power Supply AD-55 EMC Certificate
RoHS Certificate
Battery Charger Power Supply RoHS

Send message