50W Dual Output Switching Power Supply D-50

50W Dual Output Switching Power Supply D-50

Features:

  • AC input selectable by switch
  • Protections: Short circuit/Over load
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 24KHz I/P-O/P:Rated

Description

50W Dual Output Switching Power Supply D-50 Technical Data

MODELD-50AD-50B
OUTPUTOUTPUT NUMBERCH1CH2CH1CH2
DC VOLTAGE5V12V5V24V
RATED CURRENT6A2A6A1A
CURRENT RANGE1 ~ 6A0.3 ~ 2A1 ~ 6A0.2 ~ 1A
RATED POWER54W54W
RIPPLE & NOISE (max.) Note.250mVp-p100mVp-p50mVp-p100mVp-p
VOLTAGE ADJ. RANGECH1: 4.75 ~ 5.5VCH1: 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3±2.0%+5,-8%±2.0%±8.0%
LINE REGULATION±0.5%±1.0%±0.5%±1.0%
LOAD REGULATION±0.5%±5.0%±0.5%±8.0%
SETUP, RISE, HOLD TIME200ms,100ms, 20ms at full load
INPUTVOLTAGE RANGE85 ~ 132VAC / 170 ~ 264VAC selected by switch     240 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)73%73%
AC CURRENT1.3A/115VAC     0.65A/230VAC
INRUSH CURRENT (max.)COLD START 18A/115VAC     36A/230VAC
LEAKAGE CURRENT<0.5mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power.
Protection type: Fold back current limiting, recovers automatically after fault condition is removed
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC) on +5V output
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMCSAFETY STANDARDSDesign refer to UL1012
WITHSTAND VOLTAGEI/P-O/P: 1.5KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONDesign refer to FCC Part15 J Conduction
OTHERSMTBF408.9K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION159*97*38mm (L*W*H)
PACKING0.5Kg; 30pcs/16.4Kg/0.0250CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.

50W Dual Output Switching Power Supply D-50 Mechanical

50W Dual Output Switching Power Supply D-50 Mechanical

50W Dual Output Switching Power Supply D-50 Certificate

LVD Certificate
50W Dual Output Switching Power Supply D-50 LVD Certificate
EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS

Send message