500W Switching Power Supply S-500

500W Switching Power Supply S-500

Features:

  • AC input
  • Protections: Short circuit/Over load/Over voltage
  • Forced air cooling by built-in DC fan
  • PWM control and regulated
  • 100% full load burn-in test
  • Low cost

Description

500W Switching Power Supply S-500 Technical Data

MODELS-500-12S-500-13.5S-500-15S-500-24S-500-27S-500-36S-500-48
OUTPUTDC VOLTAGE12V13.5V15V24V27V36V48V
RATED CURRENT40A36A32A20A18A13.8A10A
CURRENT RANGE0 ~ 40A0 ~ 36A0 ~ 32A0 ~ 20A0 ~ 18A0 ~ 11.1A0 ~ 10A
RATED POWER480W486W480W480W486W496.8W480W
RIPPLE & NOISE (max.) Note.2240mVp-p240mVp-p240mVp-p240mVp-p240mVp-p300mVp-p300mVp-p
VOLTAGE ADJ. RANGE10 ~ 13.2V12 ~ 15V13.5 ~ 18V20 ~ 26.4V26 ~ 32V32 ~ 40V41 ~ 56V
VOLTAGE TOLERANCE Note.3±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
SETUP, RISE, HOLD TIME200ms, 50ms, 20ms at full load
INPUTVOLTAGE RANGE180 ~ 264VAC (110VAC input can be custom-made)
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)84%84%84%86.0%87.0%88%88%
AC CURRENT7A/115V        3.5A/230V
INRUSH CURRENT (max.)18A/115V      36A/230V
LEAKAGE CURRENT<3.5mA / 240VAC
PROTECTIONOVERLOAD105 ~ 135% of rate load
Protection type: Fold back current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE13.8 ~ 16.2V15.5 ~ 18.2V18 ~ 21V27.6 ~ 32.4V31 ~ 36.5V40.5 ~ 46.5V57.6 ~ 67.2V
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
FAN CONTROL,O.T.P.RTH1 or RTH2≥50ºC FAN ON, ≤45ºC FAN OFF, ≥80ºC output shut down
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC(Note 4)SAFETY STANDARDSDesign refer to UL1950, TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P: 1.5KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A
OTHERSMTBF138.6K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION240*125*65mm (L*W*H)
PACKING1.35Kg/pc, 12pcs/17.7Kgs/0.0326CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.

500W Switching Power Supply S-500 Mechanical

500W Switching Power Supply S-500 Certificate

LVD Certificate
500W Switching Power Supply S-500 LVD Certificate
EMC Certificate
500W Switching Power Supply S-500 EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS

Send message