40W Triple Output Switching Power Supply T-40

40W Triple Output Switching Power Supply T-40

Features:

  • Universal AC input / Full range
  • Protections: Short circuit/Over load/Over voltage
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 40KHz

Description

40W Triple Output Switching Power Supply T-40 Technical Data

MODELT-40AT-40BT-40C
OUTPUTOUTPUT NUMBERCH1CH2CH3CH1CH2CH3CH1CH2CH3
DC VOLTAGE5V12V-5V5V12V-12V5V15V-15V
RATED CURRENT3A2A0.5A3A2A0.5A3A1.5A0.5A
CURRENT RANGE0.6 ~ 5A0.2 ~ 3A0.1 ~ 1A0.6 ~ 5A0.2 ~ 3A0.1 ~ 1A0.6 ~ 5A0.2 ~ 2A0.1 ~ 1A
RATED POWER41.5W45W45W
RIPPLE & NOISE (max.) Note.2100 mVp-p120 mVp-p100 mVp-p100 mVp-p120 mVp-p120 mVp-p100 mVp-p120 mVp-p120 mVp-p
VOLTAGE ADJ. RANGECH1: 4.75 ~ 5.5VCH1: 4.75 ~ 5.5VCH1: 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3±2.0%±6.0%±8.0%±2.0%±6.0%±8.0%±2.0%±6.0%±6.0%
LINE REGULATION±0.5%±1.0%±1.0%±0.5%±1.0%±1.0%±0.5%±1.0%±1.0%
LOAD REGULATION±0.5%±4.0%±6.0%±0.5%±4.0%±6.0%±0.5%±4.0%±4.0%
SETUP, RISE, HOLD TIME800ms, 50ms, 70ms/230VAC           1600ms, 50ms,16ms/115VAC at full load
INPUTVOLTAGE RANGE85 ~ 264VAC             120 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)72%/115VAC72%/115VAC72%/115VAC
AC CURRENT1.2A/115VAC        0.7A/230VAC
INRUSH CURRENT (max.)COLD START 20A/115VAC             40A/230VAC
LEAKAGE CURRENT<3.5mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power.
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGECH1: 5.75 ~ 6.75V
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)SAFETY STANDARDSDesign refer to CSA 60950-1, (UL60950-1, IEC60950-1, TUV EN60950-1)
WITHSTAND VOLTAGEI/P-O/P: 3KVAC  I/P-FG: 1.5KVAC  O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
OTHERSMTBF305.6K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION129*98*38mm (L*W*H)
PACKING0.39Kg; 45pcs/19.6Kg/0.0326CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºCof ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

40W Triple Output Switching Power Supply T-40 Mechanical

40W Triple Output Switching Power Supply T-40 Mechanical

40W Triple Output Switching Power Supply T-40 Certificate

LVD Certificate
40W Triple Output Switching Power Supply T-40 LVD Certificate
EMC Certificate
40W Triple Output Switching Power Supply T-40 EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS

Send message