40W Switching Power Supply S-40

40W Switching Power Supply S-40

Features:

  • Universal AC input / Full range
  • Protections: Short circuit/Over load
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 36KHz

Description

40W Switching Power Supply S-40 Technical Data

MODELS-40-5S-40-12S-40-15S-40-24
OUTPUTDC VOLTAGE5V12V15V24V
RATED CURRENT8A3.5A2.8A1.8A
CURRENT RANGE0 ~ 8A0 ~ 3.5A0 ~ 2.8A0 ~ 1.8A
RATED POWER40W42W42W43W
RIPPLE & NOISE (max.) Note.275mVp-p100mVp-p100mVp-p100mVp-p
VOLTAGE ADJ. RANGE4.75 ~ 5.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±1.0%±0.5%±0.5%±0.5%
SETUP, RISE TIME300ms, 50ms/230VAC     800ms, 50ms/115VAC at full load
HOLD TIME(Typ.)70ms/230VAC   15ms/115VAC at full load
INPUTVOLTAGE RANGE85 ~ 264VAC   120 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)72%/115VAC76%/115VAC76%/115VAC78%/115VAC
AC CURRENT1.2A/115VAC   0.6A/230VAC
INRUSH CURRENT (max.)COLD START 25A/115VAC   50A/230VAC
LEAKAGE CURRENT<1mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)SAFETY STANDARDSDesign refer to UL1012, UL1950, TUV EN60950
WITHSTAND VOLTAGEI/P-O/P: 1.5KVAC   I/P-FG: 1.5KVAC    O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A
OTHERSMTBF314.1K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION129*98*38mm (L*W*H)
PACKING0.412Kg; 45pcs/20.43Kg/0.0326CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

40W Switching Power Supply S-40 Mechanical

40W Switching Power Supply S-40 Mechanical
LVD Certificate
40W Switching Power Supply S-40 LVD Certificate
EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS
Empty tab. Edit page to add content here.

Send message