320W PFC Power Supply SP-320

320W PFC Power Supply SP-320

Features:

  • Universal AC input / Full range
  • Built-in active PFC function, PF>0.95
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Forced air cooling by built-in DC Fan
  • Built-in fan speed control
  • Fixed switching frequency at 100KHz

Description

320W PFC Power Supply SP-320 Technical Data

MODELSP-320-3.3SP-320-5SP-320-7.5SP-320-12SP-320-13.5SP-320-15SP-320-24SP-320-27SP-320-36SP-320-48
OUTPUTDC VOLTAGE3.3V5V7.5V12V13.5V15V24V27V36V48V
RATED CURRENT55A55A40A25A22A20A13A11.7A8.8A6.7A
CURRENT RANGE0 ~ 55A0 ~ 55A0 ~ 40A0 ~ 25A0 ~ 22A0 ~ 20A0 ~ 13A0 ~ 11.7A0 ~ 8.8A0 ~ 6.7A
RATED POWER181.5W300W300W300W297W300W312W315.9W316.8W321.6W
RIPPLE & NOISE (max.) Note.2150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p200mVp-p220mVp-p240mVp-p
VOLTAGE ADJ. RANGE3.14 ~ 3.63V4.5 ~ 5.5V6 ~ 9V10 ~ 13.2V12 ~ 15V13.5 ~ 18V20 ~ 26.4V26 ~ 31.5V32.4 ~ 39.6V41 ~ 56V
VOLTAGE TOLERANCE Note.3±1.0%±2.0%±2.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%±0.2%
LOAD REGULATION±1.5%±1.0%±1.0%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
SETUP, RISE, HOLD TIME800ms, 50ms, 16ms/230VAC      2500ms, 50ms, 16ms/115VAC at full load
INPUTVOLTAGE RANGE88 ~ 264VAC        124 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
POWER FACTOR (Typ.)PF>0.95/230VAC      PF>0.98/115VAC at full load
EFFICIENCY (Typ.)74%79%83%86%86%86%87%88%87%89%
AC CURRENT(Typ.)5A/115VAC          2.5A/230VAC
INRUSH CURRENT (Typ.)COLD START  20A/115VAC     40A/230VAC
LEAKAGE CURRENT<1mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE3.8 ~ 4.5V5.75 ~ 6.75V9.4 ~ 10.9V13.8 ~ 16.2V15.5 ~ 18.2V18 ~ 21V27.6~ 32.4V33.7 ~ 39.2V45 ~ 52.5V57.6 ~ 67.2V
Protection type: Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE80ºC±5ºC (70ºC±5ºC 3.3V, 5V only) (TSW1:Detect on heatsink of power transistor)
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENTWORKING TEMP.-20 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC(Note4)SAFETY STANDARDSDesign refer to UL60950-1,TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P: 3KVAC   I/P-FG: 1.5KVAC    O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022(CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11;EN50204,EN55024,Light industry level, criteria A
OTHERSMTBF207K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION215*115*50mm (L*W*H)
PACKING1.1Kg; 12pcs/14Kg/0.92CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. derating may be needed under low input voltages.Plase check the derating curve for more details.

320W PFC Power Supply SP-320 Mechanical

320W PFC Power Supply SP-320 Mechanical

320W PFC Power Supply SP-320 Certificate

LVD Certificate
EMC Certificate
RoHS Certificate
PFC Power Supply RoHS

Send message