Dual Output 25W Open Frame Power Supply PD-25

Dual Output 25W Open Frame Power Supply PD-25

Features:

  • Universal AC input / Full range
  • Low leakage current<0.5mA
  • Protections: Short circuit/Over load/Over voltage/Over temperature
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 100KHz
  • Low cost
  • High reliability

Description

Dual Output 25W Open Frame Power Supply PD-25 Technical Data

MODELPD-25APD-25BPD-2505PS-2512PS-2515
OUTPUTOUTPUT NUMBERCH1CH2CH1CH2CH1CH2CH1CH2CH1CH2
DC VOLTAGE5V12V5V24V5V-5V12V-12V15V-15V
RATED CURRENT2.1A1.2A1.2A0.8A2.5A2.5A1A1A0.8A0.8A
CURRENT RANGE0.2 ~ 2.5A0.1 ~ 1.5A0.2 ~ 2A0.1 ~ 1A0.1 ~ 3A0.1 ~ 2.5A0.1 ~ 1.2A0.1 ~ 1.2A0.1 ~ 1A0.1 ~ 1A
RATED POWER25W25.2W25W24W24W
RIPPLE & NOISE (max.) Note.250mVp-p150mVp-p50mVp-p200mVp-p50mVp-p50mVp-p50mVp-p50mVp-p50mVp-p50mVp-p
VOLTAGE TOLERANCE Note.3±2.0%±6.0%±2.0%±6.0%±6.0%±6.0%±4.0%±4.0%±4.0%±4.0%
LINE REGULATION±0.5%±2.0%±0.5%±2.0%±1.0%±1.0%±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±1.0%±4.0%±1.0%±4.0%±4.0%±4.0%±3.0%±3.0%±3.0%±3.0%
SETUP, RISE, HOLD TIME250ms, 50ms, 100ms/230VAC      250ms, 30ms, 16ms/115VAC at full load
INPUTVOLTAGE RANGE85 ~ 264VAC          127 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)71%77%73%74%75%
AC CURRENT0.65A/115VAC      0.4A/230VAC
INRUSH CURRENT (max.)COLD START 32A
LEAKAGE CURRENT<0.5mA/240VAC
PROTECTIONOVERLOADAbove 105% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE5.75 ~ 6.75V13.8 ~ 16.2V5.75 ~ 6.75V27.6 ~ 32.4V5.75 ~ 6.75V-5.75 ~ -6.75V13.8 ~ 16.2V-13.8 ~ -16.2V17.3 ~ 20.3V-17.3 ~ -20.3V
Protection type: Shut down o/p voltage, re-power on to recover
OVER TEMPERATURETj 135ºC typically (U1)Detect on main control IC
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note4)SAFETY STANDARDSDesign refer to UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P: 3KVAC  I/P-FG: 1.5KVAC  O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5; Light industry level, criteria A
OTHERSMTBF507.9Khrs min. MIL-HDBK-217F(25ºC)
DIMENSION107*61*28mm (L*W*H)
PACKING0.15Kg; 96pcs/15.9Kg/1.3CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºCof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Dual Output 25W Open Frame Power Supply PD-25 Mechanical

Dual Output 25W Open Frame Power Supply PD-25 Certificate

LVD Certificate
25W Open Frame Power Supply PD-25 LVD Certificate
EMC Certificate
25W Open Frame Power Supply PD-25 EMC Certificate
RoHS Certificate
Open Frame Power Supply RoHS

Send message