150W DC-DC Converter SD-150

150W DC-DC Converter SD-150

Features:

  • 2:1 wide input range
  • Protections: Short circuit/Over load/Over voltage
  • 1500VDC I/O isolation
  • Built-in EMI filter, low ripple noise
  • 100% full load burn-in test
  • 24V and 48V input voltage design refer to LVD
  • Low cost
  • High reliability

Description

150W DC-DC Converter SD-150 Technical Data

MODELSD-150B-12SD-150C-12SD-150D-12SD-150B-24SD-150C-24SD-150D-24
OUTPUTDC VOLTAGE12V24V
RATED CURRENT12.5A6.3A
CURRENT RANGE0 ~ 12.5A0 ~ 6.3A
RATED POWER150W151.2W
RIPPLE & NOISE (max.) Note.2120mVp-p150mVp-p
VOLTAGE ADJ. RANGE11 ~ 16VDC23 ~ 30VDC
VOLTAGE TOLERANCE Note.3±1.0%±1.0%
LINE REGULATION±0.5%±0.3%
LOAD REGULATION±0.5%±0.3%
SETUP, RISE, HOLD TIME2s, 50ms(only D mode) at full load
INPUTVOLTAGE RANGEB:19 ~ 36VDC          C:36 ~ 72VDC          D:72 ~ 144VDC or 85 ~ 132VAC
EFFICIENCY (Typ.)75%77%79%77%80%82%
DC CURRENT6.8A/24V3.4A/48V2.7A/96V6.8A/24V3.4A/48V2.7A/96V
INRUSH CURRENT (Typ.)D:22.5A / 96VDC
LEAKAGE CURRENT<0.75mA / 120VAC (SD-150D)
PROTECTIONOVERLOAD105 ~ 135% rated output power
Protection type: Fold back current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE16.8 ~ 20V/10% load31.5 ~ 37.5V/10% load
Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY &EMC (Note 4)SAFETY STANDARDSDesign refer to EN60950-1 CB, TUV
WITHSTAND VOLTAGEI/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONDesign refer to EN55022(CISPR22) CLASS B
EMS IMMUNITYDesign refer to EN61000-4-2,3,4,6,8; ENV50204, EN55024, light industry level, criteria A
OTHERSMTBF296.2K hrs min.(SD-150B)          289.9K hrs min.(SD-150C)         289K hrs min.(SD-150D) MIL-HDBK-217F (25ºC )
DIMENSION199*110*50mm (L*W*H)
PACKING0.86Kg; 16pcs/14.5Kg/0.95CUFT
NOTE1. All parameters NOT specially mentioned are measured at normal input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

150W DC-DC Converter SD-150 Mechanical

150W DC-DC Converter SD-150 Mechanical

150W DC-DC Converter SD-150 Certificate

LVD Certificate
EMC Certificate
150W DC-DC Converter SD-150 EMC Certificate
RoHS Certificate
DC-DC Converter RoHS Certificate

Send message