1500W Switching Power Supply SCN-1K5

1500W Switching Power Supply SCN-1K5

Features:

  • AC 200~260V input only
  • Protections: Short circuit/ Over voltage/ Over load/ Over temp.
  • High reliability/ Low ripple noise
  • Built-in remote sense function
  • Built-in remote ON-OFF control
  • With parallel function
  • Can adjust from 20~100% output voltage by external control 1-5V
  • Forced air cooling by built-in DC fan
  • Case coating with paint

Description

1500W Switching Power Supply SCN-1K5 Technical Data

MODELSCN-1K5-12SCN-1K5-15SCN-1K5-24SCN-1K5-48
OUTPUTDC VOLTAGE12V15V24V48V
RATED CURRENT125A100A62.5A32A
CURRENT RANGE0 ~ 125A0 ~ 100A0 ~ 62.5A0 ~ 32A
RATED POWER1500W1500W1500W1536W
RIPPLE & NOISE (max.) Note.2120mVp-p150mVp-p240mVp-p480mVp-p
VOLTAGE ADJ. RANGE±5.0% typical adjustment by potentiometer  20~100% adjustment by 1~5VDC external control
VOLTAGE TOLERANCE Note.3±1.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±0.5%±0.5%±0.5%±0.5%
SETUP, RISE, HOLD TIME800ms, 50ms, 16ms at full load
INPUTVOLTAGE RANGE200 ~ 260VAC    290~370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)83%85%85%87%
AC CURRENT12A  / 230VAC
INRUSH CURRENT (max.)120A / 230VAC
LEAKAGE CURRENT3.5mA / 240VAC
PROTECTIONOVERLOAD110~135% rated output power
Protection type: Current limiting, delay Shut down o/p voltage, re-power on to recover.
OVER VOLTAGE110~135% follow to output set up point
Protection type: Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE>100ºC / measure by heat sink, near transformer
Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENTWORKING TEMP.,HUMIDITY-10 ~ +65ºC, 20 ~ 90% RH
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.04%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note. 4)SAFETY STANDARDSDesign refer to UL1950, CSA22.2, IEC60950
EMI CONDUCTION & RADIATIONCompliance to FCC part 15 class A
WITHSTAND VOLTAGEI/P-O/P:1.5KVAC I/P-FG:1.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG,>100M Ohms/500VDC
OTHERSMTBF60khrs min. MIL-HDBK-217F (25ºC)
DIMENSION291*132*132mm (L*W*H)
PACKING4.5kg ; 4pcs/20kg/CARTON
SPECIAL FUNCTIONDC VOLTAGEadj., Remote sensing, remote control, parallel operation (refer to terminal instruction manual)
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

1500W Switching Power Supply SCN-1K5 Mechanical

1500W Switching Power Supply SCN-1K5 Certificate

LVD Certificate
EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS

Send message