120W Quad Output Switching Power Supply Q-120

120W Quad Output Switching Power Supply Q-120

Features:

  • AC input range selected by switch
  • Protections: Short circuit/Over load/Over voltage
  • 100% full load burn-in test
  • Fixed switching frequency at 25KHz

Description

120W Quad Output Switching Power Supply Q-120 Technical Data

MODELQ-120BQ-120CQ-120D
OUTPUTOUTPUT NUMBERCH1CH2CH3CH4CH1CH2CH3CH4CH1CH2CH3CH4
DC VOLTAGE5V12V-5V-12V5V15V-5V-15V5V12V24V-12V
RATED CURRENT11A4A1A1A10A3.5A1A1A8A2A2A1A
CURRENT RANGE2 ~ 12A0.5 ~ 5A0.2 ~ 1A0.2 ~ 1A2 ~ 12A0.5 ~ 5A0.2 ~ 1A0.2 ~ 1A2 ~ 12A0.2 ~ 5A0.2 ~ 2A0.2 ~ 1A
RATED POWER120W122.5W124W
RIPPLE & NOISE (max.) Note.280mVp-p120mVp-p80mVp-p120mVp-p80mVp-p150mVp-p80mVp-p150mVp-p80mVp-p120mVp-p180mVp-p120mVp-p
VOLTAGE ADJ. RANGECH1: 4.75 ~ 5.5
VOLTAGE TOLERANCE Note.3±2.0%±6.0%±6.0%±6.0%±2.0%+10,-5%±6.0%+10,-5%±2.0%±6.0%±6.0%±6.0%
LINE REGULATION±0.5%±1.0%±1.0%±1.0%±0.5%±1.0%±1.0%±1.0%±0.5%±1.0%±1.0%±1.0%
LOAD REGULATION±0.5%±5.0%±5.0%±5.0%±0.5%±6.0%±5.0%±6.0%±0.5%±5.0%±5.0%±5.0%
SETUP, RISE, HOLD TIME200ms, 50ms, 20ms at full load
INPUTVOLTAGE RANGE88 ~ 132VAC/176 ~ 264VAC selected by switch          240 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)77%76%80%
AC CURRENT2.8A/115VAC            1.6A/230VAC
INRUSH CURRENT (max.)COLD START 35A
LEAKAGE CURRENT<3.5mA / 240VAC
PROTECTIONOVERLOAD105~135% rated output power
Protection type: Shut down o/p voltage, re-power on to recover.
OVER VOLTAGECH1: 5.75 ~ 6.75VDC
Protection type: Shut down o/p voltage, re-power on to recover.
ENVIRONMENTWORKING TEMP.-10~+60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)SAFETY STANDARDSDesign refer to UL1950, TUV EN60950
WITHSTAND VOLTAGEI/P-O/P: 3KVAC  I/P-FG: 1.5KVAC  O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
HARMONIC CURRENTCompliance to EN61000-3-2,-3, Class A
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
OTHERSMTBF261.4K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION199*110*50mm (L*W*H)
PACKING0.81Kg; 16pcs/14.51Kg/0.0287CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºCof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

120W Quad Output Switching Power Supply Q-120 Mechanical

120W Quad Output Switching Power Supply Q-120 Mechanical

120W Quad Output Switching Power Supply Q-120 Certificate

LVD Certificate
120W Quad Output Switching Power Supply Q-120 LVD Certificate
EMC Certificate
120W Quad Output Switching Power Supply Q-120 EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS

Send message