104W Video Game Power Supply MWP-608

104W Video Game Power Supply MWP-608

Features:

  • AC input range selected by switch
  • Protections: Short circuit/Over load
  • Cooling by free air convection
  • Output voltage correction LED
  • 100% full load burn-in test
  • Low cost
  • High reliability

Description

104W Video Game Power Supply MWP-608 Technical Data

MODELMWP-608
OUTPUTDC VOLTAGE5V12V24V
RATED CURRENT10A2A1.25A
CURRENT RANGE3-15A0.2-4A0.2-4A
RATED POWER104W
RIPPLE & NOISE (max.) Note.250mVp-p120mVp-p150mVp-p
VOLTAGE ADJ. RANGECH1: 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3±2%±8%-5,+10%
LINE REGULATION±0.5%±1%±1%
LOAD REGULATION±1%±6%±8%
SETUP, RISE, HOLD TIME200ms,50ms,16ms
INPUTVOLTAGE RANGE88 ~ 132VAC / 176 ~ 264VAC selected by switch
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)80%
AC CURRENT2.8A/115VAC 1.7A/230VAC
INRUSH CURRENT (max.)COLD START 20A/115VAC 40A/230VAC
LEAKAGE CURRENT<3.5mA / 240VAC
PROTECTIONOVERLOAD150 ~ 200% rated output power.(CH1:19.2 ~29.2)
Protection type: Fold back current limiting, recovers automatically afete fault condition is removed
FUNCTIONOPERATIONG DISPLAYDouble color LED correct Range: Green(5~5.4Vref.); Wrong Range:Red
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC , 10 ~ 95% RH
TEMP. COEFFICIENT±0.05%/ (0 ~ 50ºC) ON +5V output
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note.4)SAFETY STANDARDSDesign refer to UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONEN55022(CISPR22) Class B
HARMONIC CURRENTEN61555-2,-3
EMS IMMUNITYEN61000-4-2,3,4,5 Light industry level, criteria A
OTHERSMTBF267K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION180*110*50mm(L*W*H)
PACKING0.9Kg; 16pcs/15.4Kg/0.0287CMB
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

104W Video Game Power Supply MWP-608 Mechanical

104W Video Game Power Supply MWP-608 Mechanical

104W Video Game Power Supply MWP-608 Certificate

LVD Certificate
104W Video Game Power Supply MWP-608 LVD Certificate
EMC Certificate
RoHS Certificate
Switching Power Supply RS-rohs

Send message