104W Video Game Power Supply MWP-602

104W Video Game Power Supply MWP-602

Features:

  • AC input range selected by switch
  • Protections: Short circuit/Over load
  • Cooling by free air convection
  • Output voltage correction LED
  • 100% full load burn-in test
  • Low cost
  • High reliability

Description

104W Video Game Power Supply MWP-602 Technical Data

MODELMWP-602/MWP-602A
OUTPUTDC VOLTAGE5V15V-5V
RATED CURRENT15A2A1A
CURRENT RANGE3-15A0.2-3A0.1-1A
RATED POWER104W
RIPPLE & NOISE (max.) Note.250mVp-p120mVp-p60mVp-p
VOLTAGE ADJ. RANGECH1: 4.7 ~ 5.8V
VOLTAGE TOLERANCE Note.3±2%±8%±10%
LINE REGULATION±0.5%±1%±1%
LOAD REGULATION±1%±6%±8%
SETUP, RISE, HOLD TIME200ms,50ms,16ms
INPUTVOLTAGE RANGE88 ~ 132VAC / 176 ~ 264VAC selected by switch 240 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)75%
AC CURRENT2.6A/115VAC 1.3A/230VAC
INRUSH CURRENT (max.)COLD START 20A/115VAC 40A/230VAC
LEAKAGE CURRENT<0.5mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power.
Protection type: Fold back current shutdown reset re-power on
FUNCTIONOPERATIONG DISPLAY602A DOUBLE COLOR LED CORRECT RANGE:GREEN(5~5.4Vref.) WRONG RANGE:RED
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC , 10 ~ 95% RH
TEMP. COEFFICIENT±0.05%/ (0 ~ 50ºC) ON +5V output
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note.4)SAFETY STANDARDSDesign refer to UL60950-1, TUV EN60950-1
WItdSTAND VOLTAGEI/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
OtdERSMTBF348.3K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION180*110*50mm(L*W*H)
PACKING0.9Kg; 16pcs/15.4Kg/0.0287CMB
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
5.the power supply is considered a component which will be installed into a final equipment. the final equipment must be re-confirmed that it still meets EMC directives.

104W Video Game Power Supply MWP-602 Mechanical

104W Video Game Power Supply MWP-602-m

104W Video Game Power Supply MWP-602 Certificate

LVD Certificate
104W Video Game Power Supply MWP-602 LVD Certificate
EMC Certificate
104W Video Game Power Supply MWP-602 EMC Certificate
RoHS Certificate
Switching Power Supply RS-rohs

Send message