100W Waterproof Power Supply SV-100

100W Waterproof Power Supply SV-100

Features:

  • Protections: Short circuit/Over load
  • 100% full load burn-in
  • Lost cost
  • High reliability
  • Waterproof and moisture proof
  • Convenient wiring

Description

100W Waterproof Power Supply SV-100 Technical Data

MODELSV-100-5SV-100-12SV-100-15SV-100-24SV-100-48
OUTPUTDC VOLTAGE5V12V15V24V48V
RATED CURRENT20A8.5A7A4.5A2.3A
CURRENT RANGE0 ~ 20A0 ~ 8.5A0 ~ 7A0 ~ 4.5A0 ~ 2.3A
RATED POWER100W102W105W108W110.4W
RIPPLE & NOISE (max.) Note.280mVp-p120mVp-p120mVp-p120mVp-p200mVp-p
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%
LOAD REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%
SETUP, RISE, HOLD TIME500ms, 20ms, 30ms/230VAC at full load
INPUTVOLTAGE RANGE176 ~ 264VAC   248 ~ 373VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)80%83%84%86%86%
AC CURRENT(Typ.)1.5A/230VAC
INRUSH CURRENT (Typ.)COLD START 36A
LEAKAGE CURRENT<2mA / 240VAC
PROTECTIONOVERLOAD110 ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V55.2 ~ 64.8V
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATURE85ºC± 5ºC (TSW1) Detect on heatsink of power transistor
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENTWORKING TEMP.-30 ~ +70ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC(Note.4)SAFETY STANDARDSDesign refer to UL60950-1,TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022(CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A
OTHERSMTBF320.7Khrs min. MIL-HDBK-217F (25ºC)
DIMENSION238*68*53mm (L*W*H)
PACKING2.1Kg; 5pcs/11Kg/0.022CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

100W Waterproof Power Supply SV-100 Mechanical

100W Waterproof Power Supply SV-100 Certificate

LVD Certificate
EMC Certificate
100W Waterproof Power Supply SV-100 EMC Certificate
RoHS Certificate
Waterproof Power Supply SV RoHS

Send message