100W Switching Power Supply S-100

100W Switching Power Supply S-100

Features:

  • AC input range selectable by switch
  • Protections: Short circuit/Over load
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 25KHz
  • Low cost
  • High reliability

Description

100W Switching Power Supply S-100 Technical Data

MODELS-100-5S-100-7.5S-100-10S-100-12S-100-15S-100-18S-100-24S-100-27S-100-36S-100-48
OUTPUTDC VOLTAGE5V7.5V10V12V15V18V24V27V36V48V
RATED CURRENT20A13.6A10A8.5A6.7A5.6A4.5A3.7A2.7A2A
CURRENT RANGE0 ~ 20A0 ~ 13.6A0 ~ 10A0 ~ 8.5A0 ~ 6.7A0 ~ 5.6A0 ~ 4.5A0 ~ 3.7A0 ~ 2.7A0 ~ 2A
RATED POWER100W102W100W102W100.5W100.8W108W99.9W97.2W96W
RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p
VOLTAGE ADJ. RANGE4.75 ~ 5.5V6.75 ~ 8.25V9 ~ 11V10.8 ~ 13.2V13.5 ~ 16.5V16.2 ~ 19.8V21.6 ~ 26.4V24.4 ~ 29.7V32.4 ~ 39.6V43.2 ~ 52.8V
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%±0.2%
LOAD REGULATION±0.5%±0.5%±0.3%±0.3%±0.3%±0.3%±0.2%±0.2%±0.2%±0.2%
SETUP, RISE, HOLD TIME200ms, 80ms, 24ms at full load
INPUTVOLTAGE RANGE85 ~ 132VAC/180 ~ 264VAC selected by switch       255 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)78%80%80%81%81%82%84%84%84%84%
AC CURRENT1.9A/115VAC          0.96A/230VAC
INRUSH CURRENT (max.)COLD START 27A/115VAC 54A/230VAC
LEAKAGE CURRENT<1mA / 240VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power
Protection type: Shut down o/p voltage, re-power on to recover.
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMCSAFETY STANDARDSDesign refer to UL1012
WITHSTAND VOLTAGEI/P-O/P: 1.5KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONDesign refer to FCC Part15 J Conduction Class B
OTHERSMTBF322.4K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION199*98*38mm (L*W*H)
PACKING0.58Kg; 30pcs/19.3Kg/0.0250CBM
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.

100W Switching Power Supply S-100 Mechanical

100W Switching Power Supply S-100 Mechanical
LVD Certificate
100W Switching Power Supply S-100 LVD Certificate
EMC Certificate
100W Switching Power Supply S-100 EMC Certificate
RoHS Certificate
Switching Power Supply S ROHS
Empty tab. Edit page to add content here.

Send message