100W DIN Rail Power Supply MDR-100

100W DIN Rail Power Supply MDR-100

Features:

  • Universal AC input/Full range
  • Protections: Short circuit / Overload / Over voltage
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • Built in DC OK active signal
  • LED indicator for power on
  • No load power consumption<0.75W
  • 100% full load burn-in test

Description

100W DIN Rail Power Supply MDR-100 Technical Data

MODELMDR-100-12MDR-100-24MDR-100-48
OUTPUTDC VOLTAGE12V24V48V
RATED CURRENT7.5A4A2A
CURRENT RANGE0 ~ 7.5A0 ~ 4A0 ~ 2A
RATED POWER90W96W96W
RIPPLE & NOISE (max.) Note.2120mVp-p150mVp-p200mVp-p
VOLTAGE ADJ. RANGE12 ~ 15V24 ~ 30V48 ~ 56V
VOLTAGE TOLERANCE Note.3±1.0%±1.0%±1.0%
LINE REGULATION±1.0%±1.0%±1.0%
LOAD REGULATION±1.0%±1.0%±1.0%
SETUP, RISE TIME3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
HOLD TIME(Typ.)50ms/230VAC     20ms/115VAC at full load
INPUTVOLTAGE RANGE85 ~ 264VAC       120 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)83%86%87%
AC CURRENT1.3A/115VAC     0.8A/230VAC
INRUSH CURRENT (max.)COLD START 30A/115VAC 60A/230VAC
PROTECTIONOVERLOAD105 ~ 150% rated output power
Protection type: Constant current limiting,recovers automatically after fault condition is removed
OVER VOLTAGE15.6 ~ 18V31.2 ~ 36V57.6 ~ 64.8V
Protection type: Shut down o/p voltage,re-power on to recover
OVER TEMPERATUREShut down o/p voltage, auto-recovery or re-power on to recover
FUNCTIONDC OK ACTIVE SIGNAL (max.)Relay contact rating(max.): 30V/1A resistive
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATIONComponent : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ; Mounting : Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)SAFETY STANDARDSDesign refer to UL508, TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P:3KVAC     I/P-FG:2KVAC     O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC EMISSIONCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
OTHERSMTBF346K hrs min. MIL-HDBK-217F (25ºC  )
DIMENSION55*90*100mm (W*H*D)
PACKING0.42Kg; 30pcs/13.6Kg/0.82CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
6. Deating maybe needed under low input voltages, please check the dearating curve for more detail.

100W DIN Rail Power Supply MDR-100 Mechanical

100W DIN Rail Power Supply MDR-100 Mechanical

100W DIN Rail Power Supply MDR-100 Certificate

LVD Certificate
EMC Certificate
RoHS Certificate

Send message