100W DC-DC Converter SD-100

100W DC-DC Converter SD-100

Features:

  • 2:1 wide input range
  • Protections: Short circuit/Over load/Over voltage
  • 1500VDC I/O isolation
  • Built-in EMI filter, low ripple noise
  • 100% full load burn-in test
  • Fixed switching frequency at 83KHz
  • 24V and 48V input voltage design refer to LVD
  • Low cost
  • High reliability

Description

100W DC-DC Converter SD-100 Technical Data

MODELSD-100B-05SD-100C-05SD-100D-05SD-100B-12SD-100C-12SD-100D-12SD-100B-24SD-100C-24SD-100D-24
OUTPUTDC VOLTAGE5V12V24V
RATED CURRENT20A8.5A4.2A
CURRENT RANGE0 ~ 20A0 ~ 8.5A0 ~ 4.2A
RATED POWER100W102W100.8W
RIPPLE & NOISE (max.) Note.2100mVp-p120mVp-p150mVp-p
VOLTAGE ADJ. RANGE4.5 ~ 5.5VDC11 ~ 16VDC23 ~ 30VDC
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%
LINE REGULATION±0.5%±0.3%±0.2%
LOAD REGULATION±0.5%±0.3%±0.2%
SETUP, RISE, HOLD TIME2s, 50ms, 24ms(only D mode) at full load
INPUTVOLTAGE RANGEB:19 ~ 36VDC          C:36 ~ 72VDC          D:72 ~ 144VDC or 85 ~ 132VAC
EFFICIENCY (Typ.)74%75%76%75%77%80%78%81%83%
DC CURRENT4.8A/24V2.4A/48V1.8A/96V4.8A/24V2.4A/48V1.8A/96V4.8A/24V2.4A/48V1.8A/96V
INRUSH CURRENT (Typ.)D:18A/96VDC
LEAKAGE CURRENT<0.75mA/120VAC(SD-100D)
PROTECTIONOVERLOAD105 ~ 135% rated output power
Protection type: Fold back current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE5.75 ~ 6.75V/10% load16.8 ~ 20V/10% load31.5 ~ 37.5V/10% load
Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENTWORKING TEMP.-10 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY &EMC (Note 4)SAFETY STANDARDSDesign refer to EN60950-1 CB, TUV
WITHSTAND VOLTAGEI/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATIONDesign refer to EN55022(CISPR22) CLASS B
EMS IMMUNITYDesign refer to EN61000-4-2,3,4,6,8; ENV50204, EN55024, light industry level, criteria A
OTHERSMTBF356.7K hrs min.(SD-100B)          355.5K hrs min.(SD-100C)          341.9K hrs min.(SD-100D)      MIL-HDBK-217F (25ºC)
DIMENSION199*98*38mm (L*W*H)
PACKING0.65Kg; 20pcs/13.8Kg/0.8CUFT
NOTE1. All parameters NOT specially mentioned are measured at normal input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

100W DC-DC Converter SD-100 Mechanical

100W DC-DC Converter SD-100 Mechanical

100W DC-DC Converter SD-100 Certificate

LVD Certificate
100W DC-DC Converter SD-100 Certificate
EMC Certificate
100W DC-DC Converter SD-100 EMC Certificate
RoHS Certificate
DC-DC Converter RoHS Certificate

Send message