1500W Single Output Switching Power Supply SCN-1K5 Series
1500W Switching Power Supply
Features:
  • AC 200~260V input only
  • Protections: Short circuit/ Over voltage/ Over load/ Over temp.
  • High reliability/ Low ripple noise
  • Built-in remote sense function
  • Built-in remote ON-OFF control
  • With parallel function
  • Can adjust from 20~100% output voltage by external control 1-5V
  • Forced air cooling by built-in DC fan
  • Case coating with paint
SPECIFICATION:
MODEL SCN-1K5-12 SCN-1K5-15 SCN-1K5-24 SCN-1K5-48
OUTPUT DC VOLTAGE  12V 15V 24V 48V
RATED CURRENT 125A 100A 62.5A 32A
CURRENT RANGE 0 ~ 125A 0 ~ 100A 0 ~ 62.5A 0 ~ 32A
RATED POWER 1500W 1500W 1500W 1536W
RIPPLE & NOISE (max.) Note.2 120mVp-p 150mVp-p 240mVp-p 480mVp-p
VOLTAGE ADJ. RANGE ±5.0% typical adjustment by potentiometer 20~100% adjustment by 1~5VDC external control
VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE, HOLD TIME 800ms, 50ms, 16ms at full load
INPUT VOLTAGE RANGE 200 ~ 260VAC 290~370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 83% 85% 85% 87%
AC CURRENT 12A / 230VAC
INRUSH CURRENT (max.) 120A / 230VAC
LEAKAGE CURRENT 3.5mA / 240VAC
PROTECTION OVERLOAD 110~135% rated output power
Protection type : Current limiting, delay shut down o/p voltage, re-power on to recover.
OVER VOLTAGE  110~135% follow to output set up point
Protection type : Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE >100ºC / measure by heat sink, near transformer
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT WORKING TEMP.,HUMIDITY -10 ~ +65ºC (Refer to output load derating curve), 20 ~ 90% RH
STORAGE TEMP., HUMIDITY -20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.04%/ºC (0 ~ 50ºC)
VIBRATION 10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note. 4) SAFETY STANDARDS Design refer to UL1950, CSA22.2, IEC60950
EMI CONDUCTION & RADIATION Compliance to FCC part 15 class A
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG,>100M Ohms/500VDC
OTHERS MTBF 60khrs min. MIL-HDBK-217F (25ºC)
DIMENSION 291*132*132mm (L*W*H)
PACKING 4.5kg ; 4pcs/20kg/CARTON
SPECIAL FUNCTION DC voltage adj., Remote sensing, remote control, parallel operation (refer to terminal instruction manual)
NOTE 1.All parameters are specified at 230VAC input, rated load, 25ºC. 70% RH. Ambient.
2.Tolerence: includes set up tolerance, line regulation, load regulation.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meet EMC directives.